FAQ: Tyre Repair & Replacement in Qatar

Everything you need to know about flat tyre repair and mobile tyre services in Qatar — from what to do in an emergency to when to repair vs replace.

Flat Tyre Emergencies

What should I do immediately if I get a flat tyre on a Qatar highway?

1. Stay calm — do not brake sharply. Ease off the accelerator and hold the steering wheel firmly.
2. Move to safety — guide the car to the hard shoulder or emergency stop bay. Do not stop in a live traffic lane.
3. Hazard lights on immediately — turn them on as soon as you begin to pull over.
4. Stay in the vehicle — on Qatar’s expressways, it is safer to remain inside with your seatbelt on rather than standing near fast-moving traffic.
5. Call Sanad — 70090220. Our mobile tyre team will come to you.

Can I drive on a flat tyre to reach a garage?

No. Driving even a short distance on a flat tyre destroys the tyre completely and can damage the wheel rim, suspension components, and brake lines. It also severely compromises your vehicle’s handling and creates a risk of losing control. Call Sanad for mobile roadside tyre assistance — we come to you.

Repair vs Replacement

Can a punctured tyre be repaired or does it need replacing?

It depends on the location and type of damage:

• Repairable: A clean puncture caused by a nail or screw in the central three-quarters of the tread area can usually be repaired with a professional plug and patch.
• Must be replaced: Damage in the sidewall or shoulder, large cuts or tears, run-flat damage (tyre driven on while flat), or a tyre with less than 1.6mm of tread remaining cannot be safely repaired.

Sanad’s technicians assess every tyre on-site and give you an honest recommendation. We never replace a tyre that can be safely repaired.

How do I know when my tyres need replacing in Qatar?

• Tread depth below 1.6mm (use a coin test — if you can see the full coin head, replace the tyre)
• Visible cracks, cuts, or bulges in the sidewall
• Uneven wear across the tyre surface (indicates alignment or pressure issues)
• Tyres aged more than 5 years — rubber degrades in Qatar’s heat regardless of tread depth
• Vibration or pulling to one side while driving

Why do tyres wear out faster in Qatar?

Qatar’s extreme heat softens the rubber compound, increasing wear rate. Road surface temperatures in summer can exceed 70°C. Tyre pressure also increases significantly in the heat — overinflation accelerates centre tread wear and increases the risk of blowouts. Regularly checking tyre pressure (always when cold) is especially important in Qatar.

Tyre Pressure and Maintenance

How often should I check my tyre pressure in Qatar?

Check tyre pressure at least once a month and before any long journey. In Qatar’s climate, pressure changes more rapidly than in cooler countries. Always check pressure when the tyres are cold (before driving). The correct pressure for your vehicle is shown on a sticker inside the driver’s door or in the owner’s manual.

What tyre pressure should I use in Qatar’s heat?

Use the manufacturer’s recommended cold inflation pressure as stated in your vehicle handbook. Do not release air from hot tyres — hot pressure is always higher than cold and returns to normal as the tyres cool. Adding pressure to already-hot tyres risks overinflation when they cool down.

Can Sanad replace all four tyres at my location?

Yes. Sanad’s mobile tyre service can fit replacement tyres at your location. Contact us in advance for tyre replacement to ensure we have the correct size and specification in stock for your vehicle.